Remove All Entries From The Directory; To Save An Entry To A One-Touch Key - AT&T 1070 User Manual

DIRECTORY
END OF LIST
DIRECTORY
REMOVE ALL?
DIRECTORY
ALL REMOVED !
Pat Williams
5550100
COPY TO 1-TOUCH
Pat Williams
5550100
PRESS 1-TOUCH
Pat Williams
5550100
SAVED!
Directory

Remove all entries from the directory

1. Press [DIR] to begin working with the directory.
2. Press [ENTER] to select VIEW ENTRIES.
3. Press [ ] or [ ] until the screen shows END OF
LIST.
4. Press [REMOVE]. The screen display include
REMOVE ALL?
5. Press [REMOVE] again within three seconds to
confirm the command and remove all directory
entries. The screen will display ALL REMOVED!
NOTE: Once the entries are removed from the
directory, they cannot be restored.

To save an entry to a one-touch key

1. Find the entry for the desired number by
following the directions under Review
directory entries on page 46.
2. Press [ENTER] then [ ] or [ ] until you see
COPY TO 1-TOUCH.
3. Press [ENTER] to begin to save the number.
4. Press the one-touch button fo the location
where you want to save the number.
-OR-
Press [LOWER], then press the one-touch
button.
5. The screen automatically returns to the
directory record just reviewed.
SPD#01
6. Press [DIR] to exit.
NOTE: If the desired one-touch key location
was empty, the screen will display SAVED! If there
is a telephone number in it, the screen will display
REPLACE SPD#XX? (XX is the desired one-touch
location number.) You can replace the current
entry by pressing [ENTER], or keep the current
entry by pressing [ ] or [ ] until you see NO
REPLACE? Press [ENTER], then choose another
one-touch key location.
49