AT&T 1070 User Manual page 16

7
7
Telephone operation
Basic phone operation
continued from previous page
Handset
To make a call:
•
1. Lift the handset.
2. Dial a number.
• To override automatic line selection, press the
LINE button for the line you wish to select, then
lift the handset.
To answer a call, lift the handset.
•
To hang up, place the handset on the base.
•
Speakerphone
To make a call:
•
1. Press and release the desired LINE button or
[ SPEAKER]. The
2. Wait for a dial tone, then dial the number.
To answer a call, press [
•
the LINE button of the incoming call.
To end the call, press [
•
NOTES:
If SPEAKERPHONE is selected in the AUTOMATIC
•
MODE menu (page 39 of the installation guide),
pressing any line key will select the line and acti-
vate the speakerphone. If HEADSET is selected in
the AUTOMATIC MODE menu and a headset is
connected, pressing any LINE key will select the
line and activate the headset.
If HEADSET is programmed as the default mode,
•
you must press [
speakerphone.
10
SPEAKER light goes on.
SPEAKER] or press
SPEAKER].
SPEAKER] to activate the
continued on next page