Hard Drive - HP ProBook 470 G2 Maintenance And Service Manual

Hard drive

Description
1.5-TB, 5400-rpm, 9.5 mm
1-TB, 5400-rpm
750-GB, 7200-rpm
750-GB, 5400-rpm
500-GB, 7200-rpm
500-GB, 5400-rpm, 7 mm, hybrid (8-GB SSD)
320-GB, 5400-rpm
128-GB Solid-state drive, M.2
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the large service door (see
To remove a hard drive:
1. Remove the 4 Phillips PM2.5×4.0 screws (1) that secure the hard drive to the chassis.
2. Slide the hard drive (2) away from the center of the computer to disengage it from the connector.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 35).
Service door on page 36).
Spare part number
747375-001
676521-001
778191-001
634250-001
703267-001
732000-001
778183-001
773069-001