Optical Drive - HP ProBook 470 G2 Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel, bracket, and screws.
Description
DVD-ROM drive
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove both service doors (see
Remove the optical drive:
1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2. Push the optical drive tab (2) to release the optical drive from the computer.
3. Remove the optical drive (3) from the computer.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 35).
Service door on page 36).
Spare part number
768474-001
768473-001
768475-001