Optional On-Off Switch Installation Position Marking (Trunk Side Trim (Lh)) - Mazda CX-5 Installation Instructions Manual

Optional ON-OFF switch installation position marking (trunk side trim (LH))

CAUTION
Mark the drilling position for the trunk side trim (LH) before removing the vehicle parts.
1. Open the liftgate.
2. Set the selector lever to P range.
3. Disconnect the negative battery cable. (Refer to 8 page.)
4. Punch a drill guide mark in the center of the hole drilling position (2 locations) using a punch.
Drill guide mark
22mm
10mm
53mm
Trunk side trim (LH)
Cargo light
7