Rear Bumper Removal - Mazda CX-5 Installation Instructions Manual

Protective
tape
Rear over fender
Fastener
Screw B
Screw C
Fasteners D

Rear bumper removal

1. Affix the protective tape to the position (body side) shown in the
figure.
2. Remove fasteners A.
3. Pull the rear over fender in the direction of the arrow shown in
Clip B
Clip B
4. Remove screw B.
Rear bumper
5. Remove screws C.
6. Remove fasteners D.
Rear bumper
the figure above, then peel it back while removing clips B.
CAUTION
After removing clips B, insert a rag between the rear fender
panel and the rear over fender to prevent the rear fender
panel and clips B from being damaged.
15