Main harness, Buzzer and ON-OFF switch wiring harness
1. Branch connect the wiring harness (R) for the BACK signal line branch of the main wiring harness to the RBCM
(W/B) using an electro-tap.
CAUTION
Connect an electro-tap to the indicated signal line securely. Misconnection may cause a system or vehicle
malfunction.
Wrap the electro-tap area using urethane tape to prevent the occurrence of abnormal noise.
Branch connection procedure using electro tap
Vehicle wiring
Harness(W/B)
Wiring
harness (R)
Electro tap
Firmly press
using pliers
RBCM
Wiring harness (R)
Electro tap
Vehicle wiring
harness
Lock
1. Insert the wiring harness (R) and vehicle wiring
harness into the electro tap.
2. Firmly press the electro tap terminal using
pliers.
3. Fold the electro tap in the direction of the arrow
shown in the figure and lock it.
23
RBCM