Trunk Side Trim Lh Removal - Mazda CX-5 Installation Instructions Manual

Cap
Screw C
Screw D
Bolt A
Fastener B
Vehicle front
Hook F
Clip E
(2)
(4)
(1)
Pin G
Clip E
Hook F
Pin G
Clip E
Remote handle lever
Vehicle front
Trunk side trim LH
1. Remove bolts A, then remove the cargo net hook.
Tightening torque : 0.9-1.3 N m
2. Remove the fastener B.
3. Remove the screw C.
Cargo
4. Remove the cap, then remove the screw D. (4:2:4 split type)
net hook
5. Hold D-pillar trim with your hands and pull the trunk side trim
in the direction of the arrow (1), (2), (3), (4) and remove
Vehicle front
clips E, hooks F and pin G.
Trunk side trim
(3)
Clip E
6. Set the remote handle lever out of the way. (4:2:4 split type)
7. Disconnect the connector. (Cargo room light connector, rear
accessory socket connector)
removal
11