Routing - Gigaset SX763 First Steps

Routing

Your Internet service provider can permit you to set up a number of connection services.
The entire data traffic between your local network and the Internet uses the first con-
nection service (route) by default. After setting up various connection services
(page 64), you can change this default route and set up additional routes by assigning
data traffic to other connection services. Rules are provided to assist you, these define
criteria for determining which data traffic is assigned to which connection service.
ì
In the Advanced Settings menu, select: Internet – Routing
ì
Activate or deactivate Policy-based routing for your Internet connection.
ì
Choose the Policy type, i.e. how you would like to define the various routes for data
traffic between your local network and the Internet:
– Choose Specify interface to specify routes for clients in your local network
depending on the port used for connecting to your device (e.g. LAN port or wire-
less network connection).
– Choose Specify IP address, Specify IP address range or Specify MAC address
to specify routes for clients depending on your IP address or MAC address.
If you choose Specify MAC address, you can select PCs from the list of known
clients.
ì
Click Delete to delete an entry.
ì
Click Add to create a new entry with the entered data or for the selected client.
ì
Click OK to save and apply the changes.
ì
Click Cancel to reject the changes.
Configuring Advanced Settings
83