Gigaset SX763 First Steps page 58

Security Setup Wizard
Manual key entry
ì
Select the Key type, Hex or ASCII.
If you select Hex as the key type you can use the characters 0 to 9 and A to F.
– With a 64-bit encryption depth, the key is 10 characters long.
– With a 128-bit encryption depth, the key is 26 characters long.
If you select ASCII as the key type, you can use the characters 0 to 9, A to Z, a to z
plus the special characters in the ASCII character set.
– With a 64-bit encryption depth, the key is 5 characters long.
– With a 128-bit encryption depth, the key is 13 characters long.
ì
Confirm the key by entering it again in the Confirm key field.
Generating a key by means of a Passphrase
ì
Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key
is generated automatically.
Note:
It is very important that you make a note of the key or passphrase. You will need
u
this information to configure the wireless network adapters properly.
You have to change the WEP encryption in the wireless network adapters for the
u
connected PCs in the same way, otherwise they will not be given access to the
Gigaset SX763 WLAN dsl wireless network.
ì
To go to the next step, click Next >
58