Installing A Printer On The Tcp/Ip Port Retrospectively - Gigaset SX763 First Steps

ì
If you do not wish to install a printer until later, click Cancel.
Note:
The printer server of the Gigaset SX763 WLAN dsl does not work bi-directionally. It
does not evaluate any of the printer's response messages. For this reason please make
sure that your printer is also only configured uni-directionally. You can configure the
relevant settings for your printer by choosing Start – Settings – Printers.

Installing a printer on the TCP/IP port retrospectively

If you connect a printer to this port at a later stage, start the installation procedure for
the printer port as above.
ì
In this case, however, you should click the selection menu in the Select a Printer
Port window.
ì
From the list, select the connection you have set up:
e.g. Gigaset_port (Standard TCP/IP port).
ì
Click Next and finish installing the printer driver as instructed in the windows that
follow.
Using the USB port
157