Connecting And Configuring Additional Pcs (Optional) - Gigaset SX763 First Steps

First steps

Connecting and configuring additional PCs (optional)

Once you have configured one PC as described above you can connect additional PCs to
the Gigaset SX763 WLAN dsl. You will need an additional cable for each PC you want to
connect via cable. For the wireless connection of additional PCs, you will need a wireless
network adapter.
Wireless
ì
Install wireless network adapters in each other PC as described in the corresponding
user guide, making sure that the SSID of all wireless network components (Gigaset
SX763 WLAN dsl and network adapters) is identical.
If you have not changed the SSID in the Basic Setup Wizard wizard or via WPS, the
default setting will be ConnectionPoint.
If you have connected a PC via WPS, you will find the created SSID in the Advanced
Settings of the user interface (see page 87). You can see the preset pre-shared key
at the label on the devices bottom or also via the user interface in the Advanced Set-
tings menu (see page 87). You use this information to manually configure PCs with-
out WPS.
PCs with WPS can be connected wirelessly via WPS (see page 34 and page 90).
ì
If necessary, set up the network for each newly connected PC (page 37).
Wired
ì
Connect the network cards of each additional PC to a free LAN port (LAN1 – LAN4)
on the Gigaset SX763 WLAN dsl using an Ethernet cable.
ì
Make sure that the corresponding LAN LED on the front of your Gigaset SX763
WLAN dsl flashes.
ì
If necessary, set up the network for each newly connected PC (page 37).
ì
Reboot the additional PCs.
38