A wireless network is defined by assigning an identical SSID to all the devices.
ì
You should therefore enter the SSID for the Gigaset SX763 WLAN dsl in your network
adapter configuration. The default SSID for the Gigaset SX763 WLAN dsl is
ConnectionPoint.
If you use a wireless network adapter from the Gigaset range, enter the SSID using
the Gigaset WLAN Adapter Monitor.
The Gigaset SX763 WLAN dsl is delivered with preset individual encryption (WPA2-PSK/
WPA-PSK with pre-shared Key). You will find this key at the label on the devices bottom.
ì
Choose the encryption method WPA2-PSK/ WPA-PSK in the configuration settings of
your network adapter and enter the pre-shared key of you Gigaset SX763 WLAN dsl.
If one of your network adapters do not provide this encryption method, you must
change the encryption method at the Gigaset SX763 WLAN dsl (see page 92) and
then configure the encryption appropriatly for all network adapters. The settings at
the Gigaset SX763 WLAN dsl should be performed only with a wired connected PC)
If the correct SSID and encryption has been entered in your PC's wireless network
adapter, the wireless link will be established automatically.
(((
WLAN adapter
First steps
35