Gigaset SX763 First Steps page 24

First steps
LED State
On (green)
USB
Flashing
Off
On
LAN1 –
Flashing
LAN4
Off
In normal operation
On
Flashing
Off
During WPS registration
WLAN
On (300 sec) WPS registration was successful.
Flashing
slowly
Flashing
quickly
Flashing
quickly with
interruption
On
VoIP Flashing
Off
On
Phone 1/
Flashing
Phone 2
Off
24
Status
A device is connected to the Gigaset SX763 WLAN dsl via the
USB port.
The device connected on the USB port is using too much
power (see (page 169)).
There is no device connected.
A device is connected to the relevant LAN port.
The relevant LAN port is sending or receiving data (traffic).
There is no device connected.
The radio interface is activated, no data transmission at
present.
The Gigaset SX763 WLAN dsl is sending or receiving data on
the radio interface.
The radio interface is deactivated.
WPS registration is in progress.
WPS registration was not successful.
More than one client tried to register.
At least one port is configured for VoIP and VoIP access is
registered with the provider.
A call is currently being made via the Internet.
There is currently no connection for Internet telephony or no
VoIP port has been configured.
The receiver of the phone connected to the port has been
lifted.
The phone is ringing and a call is being received or a call is
being conducted.
No phone is connected or the connection is idle.