Gigaset SX763 First Steps page 140

Status information
Default gateway
u
Shows the IP address of the assigned default gateway.
Preferred DNS server
u
Shows the IP address of the assigned DNS server.
Alternate DNS server
u
Shows the IP address of the alternate DNS server, if available.
Downstream rate
u
Shows the current transmission rate for incoming traffic.
Upstream rate
u
Shows the current transmission rate for outgoing traffic.
PPPoE pass-through
u
Shows the status of PPPoE pass-through for the DSL or cable connection for estab-
lishing an Internet connection directly between a PC and the network.
ADSL Line
u
– Status
The status of the cable connection from your device to your DSL port.
– Line mode
The current line mode used by your DSL port.
– Maximum line rate
The maximum possible data transfer rate of your DSL port for incoming and out-
going data traffic.
– Noise margin
The maximum signal-to-noise ratio of your DSL port for incoming and outgoing
data traffic.
– Line attenuation
The line attenuation of your DSL port for incoming and outgoing data traffic.
– Output power
The output power of your DSL port for incoming and outgoing data traffic.
Address Translation (NAT)
u
Shows the status of the NAT (Network Address Translation) for the Internet connec-
tion.
Dynamic DNS
u
Shows the status of the configuration for dynamic DNS. If dynamic DNS is set up, the
name of the provider is shown.
ì
Click Refresh to refresh this screen and update the displayed data.
140