Gigaset SX763 First Steps page 47

Note:
Connection to the Internet is only possible if you have entered all the data for your
Internet service provider correctly.
ì
Your Internet service provider may disconnect and reconnect your Internet connec-
tion daily. In this case enable 24h reconnection and choose the period of time in
which the reconnection should be performed from the Reconnection time option
menu.
ì
Specify how Internet sessions are to be established via Connection mode:
– Select Always on if the connection is to exist at all times when the Gigaset SX763
WLAN dsl is turned on.
Notes:
This option can result in high connection charges if you are on a time-based
u
tariff.
You must set up the Always on option if you wish to use Internet telephony.
u
– Select Connect on demand if applications such as an Internet browser or an e-
mail program are to connect to the Internet automatically.
– In the Idle time before disconnect field, enter a period after which the Internet
connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
You can deactivate this function by entering "0". This means that the connection
will continue to exist even if no data is transmitted. If you are on a time-based tar-
iff, this can result in high charges. In this case you should enter a value other than
"0".
This time setting only applies to the Connect on demand and Connect manu-
ally options.
– Select Connect manually if you always want to establish and end the Internet
connection manually. If you are on a time-based tariff this will save you high con-
nection charges.
ì
You can show additional settings, depending on the selected service provider, by
means of the Show Additional Settings button. You can also change the settings,
if required. These settings are pre-set with appropriate default values. This button is
not available for the Other selection since all available settings are displayed in this
case.
ì
Click Test Settings to check the Internet connection.
An attempt is made to set up an Internet connection. The result is shown in a window.
If the connection could be set up successfully, the Close button appears.
ì
Click the Close button to return to the Basic Setup Wizard.
Basic Setup Wizard
47