Installing An Accessible Drive - Fujitsu ESPRIMO C7xx Operating Manual

Installing an accessible drive

► Open the casing (see
Do not throw away the covers. If you remove the drive again, you must reinstall the
covers (cooling, fire protection or EMC regulations to be complied with).
You must only use the screws recommended by the manufacturer. Long screws
could damage the drive or prevent it from working properly.
EMC,electromagnetic compatibility
► If necessary, remove the plastic drive cover (see
► Remove the drive cage (see
2
2
1
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup accordingly.
Fujitsu
"Opening the casing", Page
"Removing the drive cage", Page
2
"Closing the casing", Page
34).
"Removing the plastic drive cover", Page
37).
► Slide the new drive as far as it will go
into the drive cage (1).
► Fasten the screws (2).
► Install the drive cage again (see
the drive cage", Page
► Connect the connector for the data and
power cables to the drive.
35).
System expansions
36).
"Installing
38).
39