System expansions
Removing the Compact Flash module
CompactFlashmodule
► Open the casing (see
► Fold up the drive cage.
► Disconnect the Compact Flash cable connector from the mainboard. Refer
to the manual for the mainboard.
2
1
1
1
► Fold down the hard disk cage (2).
► Close the casing (see
44
"Opening the casing", Page
1
"Closing the casing", Page
34).
► Press the two ends of the EasyChange
rails together (1) and pull out the
hard disk drive (2).
► Loosen the screws (1).
► Remove the Compact Flash module
from its bay.
1
35).
Fujitsu