Ports On The Device; Connecting A Monitor - Fujitsu ESPRIMO C7xx Operating Manual

Ports on the device

Ports Device Externaldevices
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
PS/2 keyboard port, purple
Keyboardport
Serial port 1, turquoise
1
Serialport
VGA monitor connection, blue
Monitorport
Headphones jack, light green
Headphones
Audio output (Line out), light
green
Lineout Audiooutput
USB 2.0 - Universal Serial Bus,
black
UniversalSerialBus
USB 3.0 - Universal Serial Bus,
blue
DVI-I monitor port
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).

Connecting a monitor

► Follow the instructions contained in the monitor manual to prepare the
monitor for use (e.g. connect the cables).
Monitor
► Plug the data cable into the monitor port on the device.
Depending on the configuration level of your device and your monitor, you can
connect the data cable either to the DVI interface or to the DisplayPort.
► Plug the monitor power cable into a grounded mains outlet.
Fujitsu
Parallel port/printer (optional)
Printer Parallelport
Serial port 2, turquoise
2
Serialport
Microphone jack, pink
Microphonejack
Audio input (Line in), light blue
Linein Audioinput
PS/2 mouse port, green
PS/2mouseport Mouseport
LAN port
LAN
LANport
DisplayPort
DP
Getting started
17