Installing An Accessible Drive - Fujitsu Siemens SCENIC 600 Operating Manual

System expansions

Installing an accessible drive

Open the system unit (see
Should the chipcard reader get in the way of the accessible drive during installation, then
i
remove the reader (see


Pry the plastic drive cover (A) out of the front cover.


Pry the shielding plate (B) on left-hand side out of the bay.
Do not throw away the covers. If you remove the drive again later, you will have to
!
reinstall the covers.


Take the new drive out of its packaging.


Make the required settings on the drive (if necessary, on installed drives as well).
A = Position of the screw for the upper drive
B = Position of the screw for the lower drive


Slide the drive into the system unit (1).


Plug the data and the power supply connectors into the drive.


Fasten the drive with the screw (2).


If you have removed the chipcard reader, then reinstall it.
34
"Opening the system
"Installing/removing a chipcard
A
2
B
unit").
B
1
reader").
2
1
A
A26361-K520-Z100-4-7619