Indicators On The Device - Fujitsu ESPRIMO C7xx Operating Manual

Indicators on the device

Device Indicators,
The indicators are located on the front of the casing. Which indicators are available on
your device depends on the configuration level you have selected.
No. Indicator
1 Power indicator
2 Hard disk indicator
3 Drive indicator
4 SmartCard reader
indicator (optional)
Fujitsu
1 2 3 4
Description
Caution: When energy saving mode is active, the device must
not be switched off at the main power switch (if present) or
disconnected from the mains, as this may result in data loss.
• The indicator is illuminated: The device is switched on.
• The indicator is flashing: The device is in energy-saving
mode. After being switched on with the power button, the
device switches on or returns to the state it was in before the
energy-saving mode.
• The indicator is not illuminated: The device is disconnected
from the mains or is ready. If the device is ready it can be
switched on with the ON/OFF switch.
The indicator lights up when the hard disk drive of the device is
accessed.
The indicator lights up when the DVD drive in the device is being
accessed. Never remove the DVD while the indicator is illuminated.
The indicator is lit if a SmartCard reader is installed.
The indicator flashes when data is being exchanged.
Operation
23