Removing boards
► Open the casing (see
► Remove the heat sink (see
If you have installed or removed a PCI board, check the relevant PCI
slot settings in the BIOS Setup. Change the settings as required. Further
information is provided in the PCI board documentation.
Fujitsu
"Opening the casing", Page
"Removing the heat sink", Page
1
1
34).
50).
► If necessary, unplug any cables which
are connected to the board.
► If you are installing a PCI Express x16
card: Release the board.
► Remove the board from the casing (1).
► If you do not want to install a new
board, reinstall the slot cover.
► Slide the slot cover downward into the
rear panel of the casing (1).
► Reinstall the heat sink (see
the heat sink", Page
► Close the casing (see
casing", Page
35).
System expansions
"Installing
50).
"Closing the
49