Installing And Removing A Wlan Module (Optional); Installing The Wlan Module - Fujitsu ESPRIMO C7xx Operating Manual

System expansions

Installing and removing a WLAN module (optional)

WLANmodule
Operation of this module is not permitted in Taiwan.
You can also install a WLAN module for wireless LAN (Local Area Network)
in the bay of the folded-open drive cage.

Installing the WLAN module

► Open the casing (see
► Remove the drive cage (see
► Slide the WLAN module carefully into the designated bay (1) and secure it with the two screws (2).
Make sure that you do not scratch the antenna on the front opening of the drive cage.
► Connect the USB cable to the WLAN module.
► Connect the USB cable of the WLAN module onto the corresponding connector
on the mainboard. Refer to the manual for the mainboard.
► Install the drive cage again (see
► Close the casing (see
Details on using Wireless LAN can be found in the online help system
included with the Wireless LAN software.
46
"Opening the casing", Page
"Removing the drive cage", Page
1
"Installing the drive cage", Page
"Closing the casing", Page
34).
37).
38).
35).
Fujitsu