Explicit Assignment Mechanism - Alcatel Speed Touch Pro User Manual

9 IP Routing & Classical IP
9.3.4

Explicit Assignment Mechanism

Explicit assignment
Explicit assignment
example
Note
168 / 340
In the case of a remote access server which is not RFC1577
compliant, it will not respond to InATMARP requests.
As a consequence, the
address to assign the CIP PVC to the CIP member.
Therefore you must explicit assign a remote IP address to the CIP
PVC.
The default configuration of the
explicit assignment of a CIP PVC to a CIP member:
In the 'CIP Interfaces' table, the CIP member is configured as
follows:
Figure 47 STPro default CIP member configuration
In the 'CIP Connections' table, the remote IP address is statically
configured:
Figure 48 Static configuration of the remote IP address
Consequently, CIPPVC1 is explicitly assigned to cip0.
Both local and remote IP addresses must fall within the same IP
network and IP subnetwork, according the LIS parameters.
can not retrieve the remote IP
is an example of the
3EC 17059 AAAA TCZZA Ed. 02