Alcatel Speed Touch Pro User Manual page 154

8 PPP & IP Routing
Local and/or remote
IP: STPro PPP
server/client behaviour
Mode: triggering of
PPP session
154 / 340
During the opening of a PPP session, IP addresses are negotiated
between the two PPP peers for the PPP connection. The Local IP',
and 'Remote IP' fields influence this negotiation.
Typically at the client side, the 'Local IP', and 'Remote IP' boxes are
left empty. This forces the client to ask the remote server for
addresses.
In case you want to set up the
values for your network configuration must be supplied:
Setting a local IP address
"
Forces the remote PPP client (if it allows to) to accept this IP
address as the
Setting a remote IP address
"
Forces the remote client (if it allows to) to accept this IP
address as its PPP session IP address.
The 'Mode' field allows you to configure how a PPP session is
opened.
Three options are available:
Dial in
"
The PPP session is opened manually by clicking
to the PPP connection in the 'Dial in' web page.
Always on
"
After the
the automatically tries to open a PPP session for the
PPP connection.
Dial on demand
"
The PPP session is opened automatically for a limited period
of time. The opening of the session is triggered by the arrival
of packets at a/the
PPP connection.
Note: By default one PPP connection is configured as 'Dial in' (i.e.
PPP1), and another as 'Always on' (i.e. PPP2).
as PPP server, suitable
PPP session IP address.
is powered and finished its POST successfully,
Ethernet port, to be sent over the
next
3EC 17059 AAAA TCZZA Ed. 02