Alcatel Speed Touch Pro User Manual page 185

Result
Note
3EC 17059 AAAA TCZZA Ed. 02
Step Action and Description
3 Depending the RFC1577 compliancy of the remote access router, the
following must be filled in, in the 'Remote IP address' column of the
CIP PVC:
Compliancy
YES
NO
4
Click
5 Repeat steps 2, 3 and 4 until all provided cross connects are added
to the 'CIP Connections' table.
6
Click
The CIP PVCs you have added, appear in the 'CIP Connections'
table.
However, check whether the remote IP addresses get resolved on
these new CIPPVCs.
If yes, check IP connectivity with the remote device via a ping utility
on one of the local PCs.
As your ADSL provider is responsible for the cross connects, check
whether he supports this advanced configuration.
9 IP Routing & Classical IP
Remote IP Address
You don't have to fill in anything; the
InATMARP reply
assign the PVC to the CIP member.
You must fill in the exact IP address
of the remote access router; the
PVC is explicitly assigned to the
CIP member
to store the changes in permanent memory.
will implicitly
185 / 340