Cip & Ip Routing Requirements - Alcatel Speed Touch Pro User Manual

9.2 CIP & IP Routing Requirements
In this section
Remote organization
STPro
PC/workstation(s)
3EC 17059 AAAA TCZZA Ed. 02
This section coves the following topics:
Remote Organization
"
"
PC/Workstation(s)
"
The remote organization must:
Provide the VPI/VCI values of the VCs on which the CIP service
"
is enabled
Supply LLC/SNAP encapsulation of CIP Packets per RFC1483
"
Support RFC1577 Classical IP for a Permanent VC (PVC)
"
environment.
In addition the remote access device must issue and respond to
InATMARP messages.
The comes with four preconfigured CIP entries.
If the remote organization impose CIP settings which differ from
the defaults, perform the necessary adjustments via the
web pages.
See section 9.5 for more information.
In CIP mode, the
your local network. As a consequence all that is required on your
local PC(s)/workstation(s) is "standard" TCP/IP .
Prior to configuring CIP , you must establish IP connectivity with the
. The easiest method is to configure your PCs/workstations
as DHCP clients. By default the
leases IP addresses to local PCs/workstations during startup.
See subsection 11.1.4 for more information.
9 IP Routing & Classical IP
exchanges IP packets with computers on
acts as DHCP server and
163 / 340