Mitel 6869i User Manual page 48

Customizing Your Phone
Entering Usernames/Passwords and Connection Testing Using the IP Phone UI
IP Phone UI
1. Press on the phone to enter the Options List.
2. Navigate to the Credentials option and press the
Use the 3 and 4 keys to navigate to the desired feature tab (e.g. LDAP, Microsoft Exchange, BroadSoft XSI).
3.
Press the 2 key to highlight the Username field and using the dialpad keys enter in the username applicable to the
4.
Directory source.
Press the 2 key to highlight the Password field and using the dialpad keys enter in the password applicable to the
5.
Directory source.
Press the 5 key to navigate to the respective feature tab and repeat Steps 3 to 5 for any other features you want to
6.
configure.
Press the 5 key to navigate to the respective feature tab, and press the 4 key to until you get to the Test Connection tab.
7.
Press the 2 key to highlight the respective feature and press the
8.
testing on that feature.
9. Repeat Step 8 for all features you want to test.
10.Press the Test softkey to begin testing.

A green will appear if there are no issues with the authentication/connection to the external source.
!
A red will appear if issues are found.
If there are issues with your connection, please check your username and password for any errors.
11.Press the Save softkey to save your changes.
42
button or Select softkey.
button to enable authentication/connection