Additional Features; Display Dtmf Digits - Mitel 6869i User Manual

Additional Features

This section describes additional features you can use on the 6869i phone.

Display DTMF Digits

A feature on the 6869i phone allows users to enable or disable DTMF (dual-tone multi-frequency) digits to display to the
IP phone when using the dialpad to dial, or when dialing from a softkey or expansion module key.
DTMF is the signal sent from the phone to the network that you generate when you press the phone's touch keys. This is
also known as touchtone dialing. Each key you press on your phone generates two tones of specific frequencies. One
tone is generated from a high-frequency group of tones and the other from a low frequency group.
If you enable the Display DTMF Digits parameter, the digits you are dialing from the dialpad or softkey display to the IP
phone's LCD display. This parameter is disabled by default (no digits display when dialing).
You can enable the Display DTMF Digits parameter using the Mitel Web UI.
Configuring Display of DTMF Digits
Mitel Web UI
1. Click on Basic Settings > Preferences > General.
2. Enable the Display DTMF Digits field by checking the check box.
Disable this field by unchecking the box (default is disabled).
3. Click Save Settings to save your settings.
156