Mitel 6869i User Manual page 15

Network Connected/Network Disconnected
If your phone successfully connects to the network the phone will go directly to the Home screen.
If your phone did not successfully connect to the network, the Network Disconnected prompt appears on the display
and the telephone status light turns on.
Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect
when it is reconnected and remove the Network Disconnected prompt from the screen. However, if changes have been
made to your phone's network settings, you may need to restart your phone. Check with your System or Network Admin-
istrator for assistance.
For more information about connecting your phone, see the Mitel 6869i IP Phone Installation Guide.
Note:
If the phone displays a No Service status message you can still use the phone but note that it is not registered with the
Registrar. For more information about registering your phone, contact your System Administrator.
41-001554-00 REV00 – 10.2014
Getting Started