Mitel 6869i User Manual page 126

Handling Calls
3. Press the softkey configured for Directory functionality and highlight a directory entry (or the desired number if the
entry contains more than one number).
Note:
If you have any additional Directory sources configured, you will need to first navigate to the desired Directory
folder and then highlight the respective entry or number.
4. Complete either a blind or consultative transfer:
a) To complete a blind transfer, press the
receiving end answers.
b) To complete a consultative transfer, press the
Party 2 before pressing the press the softkey configured with Transfer functionality or Xfer softkey again to transfer
Party 1 to Party 2.
To cancel the transfer, press the Cancel softkey on the display screen or press
Indication of Transferred Calls
When you transfer an active call, the near-end phone displays a Call Transferred screen when a call is transferred and
the far-end call is dropped. The figure below illustrates the Call Transferred screen on the 6869i phone.
120
button to call the contact and then press the Xfer softkey before the
button to call the contact. Remain on the line to speak with
.