5.2 CLASSIFICATION OF FAULTS
To facilitate tracing of faults, these have been divided into:
• 5.3 faults at power-on
• 5.4 faults during writing of the document
• 5.5 faults during handling of the document
• 5.6 faults during read/writing the magnetic stripe.
The most frequent faults encountered and possible remedies are listed for each group.
The classifications provided cannot cover all the faults that may occur; if the fault is not amongst those
classified, it may be useful to refer to the description of a similar fault.
XZAC4219-03
Service Manual
5-3