Cleaning Sensitive; Motorcycle Parts - BMW R 1200 R Rider's Manual

Cleaning sensitive

motorcycle parts

Plastics
Clean plastic parts with water
and BMW plastic care emul-
sion. This includes in particu-
lar:
Windshields and wind de-
flectors
Headlight lens made of
plastic
Covering glass of the instru-
ment cluster
Black, unpainted parts
If plastic parts are
cleaned using unsuitable
cleaning agents, the surfaces
can be damaged.
Do not use cleaning agents
that contain alcohol, solvents
or abrasives to clean plastic
parts.
Even fly-remover pads or
cleaning pads with hard
surfaces can produce
scratches.
Soften stubborn dirt and
dead insects by covering
the affected areas with a wet
cloth.
Windshield
Clean off dirt and insects with
a soft sponge and plenty of
water.
Fuel and chemical sol-
vents attack the material
of the windshield; the wind-
shield becomes opaque or
dull.
Do not use cleaning agents.
Chrome
Especially in the case of road
salt, carefully clean chrome
parts with plenty of water and
BMW auto shampoo. Use
chrome polish for additional
treatment.
Radiator
Clean the radiator regular-
ly to prevent overheating of
the engine due to inadequate
cooling.
For example, use a garden
hose with low water pressure.
Cooling fins can be bent
easily.
When cleaning the radiator,
ensure that the fins are not
bent.
Rubber
Treat rubber components with
water or BMW rubber protec-
tion coating agent.
Using silicone sprays for
the care of rubber seals
can cause damage.
Do not use silicone sprays
or other care products that
contain silicone.
8
123
z