Replacing Parking Light - BMW R 1200 R Rider's Manual

Install bulb 3 for low-beam
or high-beam headlight in
bulb socket 4.
It is possible to inter-
change the high-beam
and low-beam bulb when in-
stalling the bulb sockets.
Watch the color coding of
the cables for the low-beam
headlight (yellow) and high-
beam headlight (white).
Install bulb socket of low-
beam bulb 1 by turning
clockwise. Watch color
coding of cable when
doing so: low-beam
headlight=yellow.
Install bulb socket of high-
beam bulb 2 by turning
clockwise. Watch color
coding of cable when
doing so: high-beam
headlight=white.
Inserting headlight in hous-
ing ( 111)

Replacing parking light

bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
work described below.
Always make sure that the
motorcycle is stable and firm-
ly supported.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.
Removing headlight from
housing ( 107)
7
109
z