BMW R 1200 R Rider's Manual page 102

their threads can suffer dam-
7
age.
Always have the tightening
100
torques of the screw connec-
tions checked by a special-
ized workshop, preferably an
authorized BMW Motorrad
retailer.
During the following
work, parts of the front
brake, and in particular of the
BMW Integral ABS, can be
damaged.
z Take care not to damage the
brake system, in particular the
ABS sensor with cable and
the ABS sensor ring.
The front wheel must be
installed right way round
to rotate in the correct direc-
tion.
Observe the direction of rota-
tion arrows on the tires or on
the rim.
Insert spacer bushing 6 into
wheel hub.
Roll front wheel into front
forks.
with OE BMW Motorrad
Integral ABS:
When rolling in wheel,
watch ABS sensor on left
side.
Lift front wheel and install
quick-release axle 5 with
appropriate torque.
Quick-release axle in
axle mount
37 lb/ft (50 Nm)
Tighten axle clamping
screw 4 with appropriate
torque.
Clamping screw for
quick-release axle
14 lb/ft (19 Nm)
Remove front wheel stand.