Press bulb 6 into fitting 7
and install it by turning it
clockwise.
Install bulb socket 5 in lamp
housing by turning clock-
wise.
Insert lamp housing in hold-
ers 4.
Install screw 3.
Install cover 2 with 3
screws 1.
Installing seat (
55)
Replacing front/rear turn
indicator bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
work described below.
Always make sure that the
motorcycle is stable and firm-
ly supported.
Make sure the ground is
level and firm and park the
motorcycle.
7
113
z