BMW R 1200 R Rider's Manual page 113

Inserting headlight in
housing
Insert headlight 4 in hous-
ing.
Install screw 3.
Insert cover 2 while mak-
ing sure that lugs 5 of cover
engage in corresponding
holders.
Install lower screw 1.
Replacing brake and rear
light bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
work described below.
Always make sure that the
motorcycle is stable and firm-
ly supported.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.
Removing seat (
7
111
z
54)