BMW R 1200 R Rider's Manual page 105

Screw in screws 1 hand-
tight and tighten with
torque.
Rear wheel on wheel
carrier
Tightening sequence:
Tighten diagonally
44 lb/ft (60 Nm)
Turn the end muffler to its
initial position.
Install screw 2 for bracket of
end muffler on rear footrest,
but do not tighten it at this
point.
Align clamp 1 with mark-
ing A on marking on end
muffler and tighten screw to
specified torque.
Torca clamp on muf-
fler and manifold
41 lb/ft (55 Nm)
7
103
z