Table of Contents
Advertisement
ALL CLIP (SHIFT + OUT) button
During player thumbnail operation, hold down the
SHIFT button and press the OUT button to change to
display ALL clip types.
➝Refer to "Changing Thumbnail Display" (page 51).
For details on other operations, refer to the
descriptions of the ENTRY button, TRIM+ /– button,
RESET button and GO TO button.
ENTRY/CLIP ➝ LIST button
17.
ENTRY button
Press to confirm trimming of IN and OUT points.
IN/OUT + ENTRY buttons
Hold down the IN or OUT button in the player or
recorder and press the ENTRY button to set the current
playback location as the IN or OUT point.
CLIP ➝ LIST (SHIFT + ENTRY) button
Inserts a clip selected in a player thumbnail at the
recorder IN point of the event at the cursor location.
18.
PLAY/REVIEW button
PLAY button
Use to play back video on the player or recorder.
REVIEW (SHIFT + PLAY) button
Use to review playback of event at the cursor location
or temporarily registered event during recorder
operation.
19.
STILL/PAUSE button
Displays still image on player or recorder. In A.DUB
mode, use this button to enter A.DUB/PAUSE status.
The menu does not open in playback mode. Nor are
the edit buttons available. Press the STOP button to
enable editing.
➝Refer to "Recording Voice-Overs" (page 109).
20.
REC button
Finalizes an edit operation, registers the event and
displays it on the timeline. Imports video to a P2 card
from an external device (RS-422A), an external input
(live recording), or hard disk used as the player.
Use the REC + PLAY button during playback in the
A.DUB mode to start voice-over recording.
➝Refer to "Recording Voice-Overs" (page 109).
21.
PREVIEW/A LEVEL REC buttons
PREVIEW button
Use this button to preview playback of event that is
being registered. Before the preview, the event is
registered and appears on the timeline. When the
player is a P2 card, the level changes made using the
fader operation during a preview are set in a registered
event.
➝Refer to "Setting Audio Level" (page 113).
◆ NOTE:
• Events created from external devices or hard disks are
indicated in orange as temporarily registered events.
• Preview playback is disabled for an external input (live
recording).
A LEVEL REC (SHIFT + PREVIEW) button
Press this button to enable adjustment of the audio
level with the fader simultaneous with a preview of the
IN and OUT points of the recorder. This mode allows
you to dynamically change the audio level in the event.
➝Refer to "Setting Audio Level" (page 113).
22.
SHIFT button
This button is used in combination with other buttons.
23.
UNITY/VAR/channel select switches and audio
playback level adjustment fader controls
Use the switches to select channels and the fader
when adjusting audio level during playback or when
recording voice-overs (mixing the original playback
sound with an additional recording).
◆ NOTE:
• Levels cannot be adjusted during playback of a playlist.
91
Editing: Playlist Function
Advertisement
Table of Contents
