Table of Contents
Advertisement
Item
FR
SUPER
FR
No.
DISP.
No.
0000
0001
034
A.SMPL RES
0000
0001
040
VFR REC
0000
0001
041
LOOP REC
0000
0001
0002
050
P.ON GUI
0000
0001
0002
051
GUI OUTPUT
0000
0001
053
UNFOCUS SCRN
069
CLOCK SET
Subscreen
0000
00
YEAR
0037
0001
01
MONTH
0012
Setting
SUPER
DISP.
16BIT
0: Audio recording is made in 16-bit.
1: Audio recording is made in 24-bit.
24BIT
NOTE:
• When 24BIT is selected, the following settings are also required to make the 24BIT
setting valid.
– Setup menu No.020 (SYS FORMAT): 1080i or 720p
– Setup menu No.025 (REC FMT (HD): AVC50 or AVC100
OFF
29.97Hz
ON
Specifies whether or not to make a VFR recording when the recording format is 720p.
0: Does not make VFR recording
1: Makes VFR recording
➝ Refer to "Variable Frame Rate-Recording" (page 44).
OFF
Specifies whether or not to make loop recording.
➝For details, refer to "LOOP REC Function" (page 40).
ON
0: Does not make loop recording
1: Makes loop recording
NOTE:
Turning the power off cancels this setting. The unit will then start up using the default
value (OFF) next time it is powered up.
OFF
Specifies whether or not the thumbnail screen or playlist screen appears when the power
THUMB
is turned on.
0: Does not display thumbnail screen and playlist screen.
PLYLST
1: Displays the thumbnail screen.
2: Displays the playlist screen.
NOTE:
Always OFF when setup menu No. 27 (VDCP CMD) is ON.
LCD
59.94Hz
LCD&V
60-25Hz
ALL
Specifies whether the GUI screen will be output to VIDEO OUT or SDI OUT connector.
0: Not output (displayed only on LCD monitor)
1: Output to VIDEO OUT connector
2: Output to both VIDEO OUT and SDI OUT connectors
NOTE:
• When 23.98 or 59-23 is selected in setup menu No. 25 (SYSTEM FREQ), the refresh
of the GUI screen output to SDI OUT may seem unnatural. Also, when the GUI screen
switches to the video screen (and vice versa), the output signal may be distorted.
• Some characters on the GUI screen output to VIDEO OUT may not be clear.
DARK
Specifies whether or not to decrease the brightness of the screen that is not selected on
the playlist screen.
NORMAL
0: Decreases the brightness of the screen not selected on the playlist screen.
1: Retains the brightness of the screen not selected on the playlist screen.
Sets the internal clock.
NOTE:
Press the STOP or SET button to open the subscreen for setting the time. Change the
date in the subscreen and press the SET button to set the clock date. To exit the
subscreen without setting a date, press the STOP or EXIT button again.
2000
Sets the year.
|
|
2037
JAN
Sets the month.
|
|
NOTE:
DEC
Setting a nonexistent day for February, April, June, September and November will
automatically set the equivalent day in the following month.
Settings and brief function description
59-23Hz
60-24Hz
60-25Hz
50Hz
23.98Hz
29.97Hz
only
only
59-23Hz
25Hz
Setup: Item Settings
175
Advertisement
Table of Contents
