Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
0000
0001
170
AVCHD REC
Panasonic camera-recorders, recording formats and recording/stopping signals (Recording Mark)
Model
AJ-HDC27F, H
AJ-HDX900
AJ-HDX400P
AJ-HDX400E
AG-HPX500/502
AG-HPX170/171/172/174
AG-HPX300/301/302/304
AG-HPX370
AJ-HPX2000/2100
*
1
AJ-HPX3000
AJ-HPX2700
*
1
AJ-HPX3700
*
1
Only recording format of 1080/**i is available.
Item
FR
SUPER
No.
DISP.
0000
0001
0002
0003
180
BATTERY SEL
0004
0005
0006
Setting
FR
SUPER
No.
DISP.
OFF
59.94Hz
ON
Selects whether to make an AVCHD recording to an SD card simultaneously with
recording to a P2 card.
0: No AVCHD recording
1: Makes an AVCHD recording to an SD card simultaneously with recording to a P2 card.
NOTE:
• Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
• AVCHD recording is not available when 480i or 576i is set in setup menu No. 020 (SYS
FORMAT). Select up-conversion recording to record 480i and 576i input as AVCHD.
• Use the setup menu No.774 (AVCHD A CH) to select channels to record.
• The start and end of recording may not match the clip recorded on the P2 card.
• AVCHD recording is not available when setup menu No. 041 (LOOP REC) is set to
ON.
Recording format
720/**p over 60p
720/59.94p
720/23.98p over 59.94p
720/29.97p over 59.94p
720/50p
720/50p over 50p
1080/59.94i
1080/23.98p over 59.94i
1080/29.97p over 59.94i
1080/50i
1080/25p over 50i
1080/59.94i
1080/50i
1080/25p over 50i
720/**p
1080/**i
Setting
FR
SUPER
No.
DISP.
NiCd12
Sets the battery type.
0: Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V)
NiCd13
1: Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V)
NiCd14
2: Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V)
S-LION
3: Settings for 1 pc. lithium-ion battery (BP-L90A) (NEAR: 11.0 V, END: 10.6 V)
I-LION
4: Settings for 1 pc. lithium-ion battery (ENDURA80) (NEAR: 13.4 V, END: 10.6 V)
TYPE-A
5: Battery specified by setup menu No. 181 (TYPE-A NEAR) and No. 182 (TYPE-A END).
TYPE-B
6: Battery specified by setup menu No. 183 (TYPE-B NEAR) and No. 184 (TYPE-B END).
Settings and brief function description
50Hz
only
Recording Mark TYPE
TYPE1
When using in TYPE1, set UB_MODE on the
camera to FRAM_RATE. When using in TYPE2,
TYPE1/TYPE2
set VITC_UB_MODE on the camera to
FRAM_RATE.
Settings and brief function description
Remarks
179
Setup: Item Settings
Advertisement
Table of Contents
