Table of Contents
Advertisement
Item
Message
LOGIN FAILED!
MISSING CLIP!
NO CARD!
NO CONTENTS!
NO CONVERTIBLE
CLIP!
NO COPY TO SAME
CARD!
NO INPUT!
NO SD CARD!
NOT SELECTED!
PING FAILED!
Thumbnail
CHECK LOG or
SET FTP-URL
SAME CLIP IS
SELECTED!
TOO MANY CLIPS!
UNKNOWN
CONTENTS
FORMAT!
UNKNOWN DATA!
USER CLIP NAME
MODIFIED!
WRITE PROTECTED! The P2 or SD memory card is write protected.
CANNOT ACCESS
CARD!
CANNOT ACCESS
TARGET!
CANNOT COPY!
FORMAT HDD TO
FAT
CANNOT FORMAT!
CANNOT
RECOGNIZE HDD!
CANNOT SELECT!
MAX.6 PARTITIONS
Hard disk
CARD IS EMPTY!
CANNOT COPY!
FORMAT P2 CARD!
HDD CAPACITY
FULL!
HDD
DISCONNECTED!
MISMATCH
COMPONENT!
P2 CARD IS
UNFORMATTED!
212
For Long and Trouble-Free Operation: Error Messages
Description
Login to destination FTP server failed.
All cards that contain the clip must be inserted to
allow attachment of shot marks.
No P2 or SD memory card is inserted.
No P2 data in the connected network folder.
No clips are convertible.
A clip cannot be copied to the card storing the
original clip.
No data is input.
No SD memory card is inserted.
An attempt was made to delete an unselected
clip.
PING failed.
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Too many clips are selected.
This warning appears when data not compatible
with the unit is detected.
The metadata character code is invalid.
Characters in the clip name had to be deleted in
adding the counter value.
An error occurred during P2 card access.
An error occurred during hard disk access.
Clips cannot be copied to hard disk without
partitions.
The hard disk cannot be initialized.
The destination target cannot be properly
recognized.
It is not possible to mount more than 6 hard disk
partitions simultaneously.
The P2 selected for copying is empty.
Importing is not possible to a P2 card containing
clips.
Not enough space left on the hard disk.
The unit is not connected to a hard disk.
Copying is not possible since the model numbers
of the two cards differ.
The P2 card is not formatted.
Measure
Check if user ID and password for the FTP client are
correct.
Insert all cards that contain the clip.
Insert compatible media.
Connect to a folder that contains P2 data.
Select convertible clips and try again.
Copy the selected clip to a card that does not
contain the original clip.
Set after making input.
Insert an SD memory card.
Select the clip you want to delete.
Check if LAN setup, FTP client URL and LAN cable
connection are correct.
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect
all identical copies from the selected clips.
Reduce the number of selected clips.
Match devices and contents version.
Use UTF-8 for the metadata character code. Use the
viewer to enter correct characters.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name
are automatically deleted when the total exceeds
100 bytes.
Insert write-enabled media.
Check P2 card.
Check hard disk status and connection.
Format using a FAT format or export data from a P2
card to create a partition.
Connect another hard disk drive.
Reboot the hard disk or connect a different hard
disk.
Cancel some of the selected partitions.
Copying is not performed since the card is empty.
Format the P2 card.
There is not enough space on the connected hard
disk. Use a new hard disk or formatted hard disk.
Reconnect the USB cable. If the hard disk does not
operate normally, turn it off and turn it back on again.
Use a P2 card with the same model number or
import video in clip units.
Use a formatted P2 card.
Advertisement
Table of Contents
