Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
0000
514
HD EMBD VITC
0001
0000
515
HD EMBD LTC
0001
0000
0001
518
VITC GEN
0000
0001
519
UB OUT SEL
Definition of terms:
SBC (Sub Code Data) area:
VAUX (Video Auxiliary Data) area:
Setting
FR
SUPER
No.
DISP.
OFF
Specifies whether or not VITC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
OFF
Specifies whether or not LTC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
OFF
59.94Hz
ON
Specifies whether or not the internal time code generator value should be recorded in the
VAUX area.
0: The internal time code generator value is not recorded.
Record the time code value when it is superimposed on input video signals.
1: The internal time code generator value is recorded.
NOTE:
• When 1394 is selected as the input signal, the time code signal superimposed on the
compressed input signal is recorded regardless of settings in this menu.
• When 23.98, 24, 29.97, 59-23, 60-24, 25, 60-25 is selected in menu No. 25 (SYSTEM
FREQ), the internal time code generator value is recorded as the time code in the
VAUX area.
SBC
59.94Hz
F_RATE
Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors
or user bits in the SBC area (DVCPRO HD only) output via the IEEE 1394 terminal during
playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as optional AVC-
Intra 1080/24PN, 30PN and 25PN clip formats.
0: Outputs the user bits recorded in the SBC area.
1: Outputs the frame rate information recorded in the VAUX area.
This area, which is separate from video and audio data area on a P2 card, stores SMPTE/
EBU compliant time code, recording dates and other information.
An area in the video data on a P2 card that stores additional information on video data.
Settings and brief function description
50Hz
only
50Hz
only
183
Setup: Item Settings
Advertisement
Table of Contents
