Standard Horizon Eclipse GX1300 Owner's Manual page 69

Position Report - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " DSC ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " POS REPORT ",
and then press the
cancel, press the
4. Press the ▲ / ▼ keys to select " NEW ID ", then
SELECT
press the
5. P r e s s t h e ▲ / ▼ k e y s to scroll through
numbers, 0 to 9.
SELECT
6. Press the
and step to the next digit to the right.
7. Repeat steps 5 and 6 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the ◄ / ►
keys repeatedly until the wrong number is highlighted, then press the ▲
/ ▼ keys to correct the entry.
8. After the ninth number has been entered, press the
YES
9. Press the
the selected vessel.
POS
Press the
information.
10. To exit from position request display, press the
QUIT
soft key.
GX1300
soft key.
S E L E C T
BACK
soft key.)
soft key.
soft key to store the number
soft key to send your position to
soft key to change the position
soft key. (To
BACK SELECT
DSC CALL
ALL SHIPS
DIST ALERT MSG
POS REQUEST
POS REPORT
BACK SELECT
POS REPORT
HISTORY
MEMORY
NEW ID
BACK SELECT
NEW ID
MMSI:
3--------
BACK FINISH SELECT
FINISH
soft key.
POS REPORT
366901555
POS: 23°56.890N
123°56.890W
Transmit a Call?
YES POS/TM NO
POS REPORT
366901555
CATEG: SAFETY
SINCE: 00:05
[ Transmitted
QUIT
Page 69
]