Standard Horizon Eclipse GX1300 Owner's Manual page 51

9. When the GX1300 receives an acknowledgement from the vessel you
called, the radio will automatically switch to the operating channel select-
ed in step 6 and produce a ringing sound.
10. Key the microphone and call the other vessel you desire to communi-
cate with.
Individual Call - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " DSC ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " INDIVIDU-
AL ", and then press the
cancel, press the
4. Press the ▲ / ▼ keys to select " NEW ID ", then
SELECT
press the
5. P r e s s t h e ▲ / ▼ k e y s to scroll through
numbers, 0 to 9.
SELECT
6. Press the
and step to the next digit to the right.
7. Repeat steps 5 and 6 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the ◄ / ►
keys repeatedly until the wrong number is highlighted, then press the ▲
/ ▼ keys to correct the entry.
8. After the ninth number has been entered, press the
9. Press the ▲ / ▼ keys to select the operat-
ing channel you want to communicate on and
SELECT
press the
GX1300
soft key.
SELECT
BACK
soft key.)
soft key.
soft key to store the number
soft key.
soft key. (To
BACK SELECT
DSC CALL
INDIVIDUAL
GROUP
ALL SHIPS
DIST ALERT MSG
BACK SELECT
INDIVIDUAL
HISTORY
MEMORY
NEW ID
BACK SELECT
NEW ID
MMSI:
3--------
BACK FINISH SELECT
FINISH
soft key.
INTERSHIP CH
CH:06
CH:08
CH:09
CH:10
BACK SELECT
Page 51