Standard Horizon Eclipse GX1300 Owner's Manual page 64

YES
6. Press the
request call.
7. If the GX1300 does not receive a reply, the
display will be as shown in the illustration on
the right. To send again, press the
key.
8. When the GX1300 receives the position from the polled vessel, the
GX1300 will produce a ringing alarm sound and the position from the
polled vessel is sent to a GPS chart plotter via NMEA 0183. (DSC BEEP
needs to be enabled to hear alarm.)
Press any key to stop the alarm.
INFO
9. Press the
data transferred from the polled vessel on the
display.
10. Press the ▲ / ▼ keys to change the display to
view the received data.
11. To exit from position request display, press the
QUIT
soft key.s
If the GX1300 does not receive position data from the polled vessel,
the position and time of LCD will show "--".
Page 64
soft key to transmit the position
soft key to show the position
RESEND
soft
NOTE
POS REQUEST
YAESU
CATEG: SAFETY
Transmit a Call?
YES NO
POS REQUEST
YAESU
CATEG: SAFETY
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
RX POS REPLY
YAESU
POS ACKNOWLEDGED
SINCE: 00:05
INFO QUIT
RX POS REPLY
POS INFO
POS: 23°56.890N
123°56.890W
TIME: 12:56 UTC
BACK QUIT
RX POS REPLY
123°56.890W
TIME: 12:56 UTC
DST: 29.8NM
BRG: 270°T
BACK QUIT
RX POS REPLY
POS INFO
POS: --°--.---_
---°--.---_
TIME: --:--
BACK QUIT
GX1300