10.2.5 Scan Type
This selection is used to select the scan mode between "Memory Scan" and
"Priority Scan".
Refer to section "8.7.1 Selecting the Scan Type" for details.
10.2.6 Scan Resume
This selection is used to select the time the GX1300 waits after a transmis-
sion ends before the radio start to scan channels again.
1. Press the MENU key to display the menu.
2. Select " SETUP " with the ▲ / ▼ / ◄ / ► keys,
then press the
3. Press the ▲ / ▼key to select " C H A N N E L
SETUP ", then press the
4. Press the ▲ / ▼ key to select " SCAN RESUME ",
then press the
5. Press the ▲ / ▼ keys to select the desired
resume time.
ENTER
6. Press the
setting.
BACK
7. Press the
10.2.7 Priority Channel
Allows selection of the priority channel.
Refer to section "8.7.4 Priority Channel Setting" for details.
10.2.8 Sub Channel
Allows selection of the sub channel. The default setting is Channel 9.
Page 94
SELECT
soft key.
SELECT
SELECT
soft key.
soft key to store the selected
soft key to exit the menu and return to radio operation.
soft key.
BACK
SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK
SELECT
CHANNEL SETUP
SCAN TYPE
SCAN RESUME
PRIORITY CH
SUB CH
BACK
SELECT
SCAN RESUME
1 sec
2 sec
3 sec
4 sec
BACK
ENTER
GX1300