Standard Horizon Eclipse GX1300 Owner's Manual page 65

Position Request - Manual MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " DSC ", then
SELECT
press the
3. P r e s s t h e ▲ / ▼ k e y s t o s e l e c t " P O S
REQUEST ", and then press the
(To cancel, press the
4. Press the ▲ / ▼ keys to select " NEW ID ", then
SELECT
press the
5. P r e s s t h e ▲ / ▼ k e y s to scroll through
numbers, 0 to 9.
SELECT
6. Press the
and step to the next digit to the right.
7. Repeat steps 5 and 6 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the ◄ / ►
keys repeatedly until the wrong number is highlighted, then press the ▲
/ ▼ keys to correct the entry.
8. After the ninth number has been entered, press the
YES
9. Press the
request call.
10. If the GX1300 does not receive a reply, the
display will be as shown in the illustration on
the right. To send again, press the
key.
GX1300
soft key.
SELECT
BACK
soft key.)
soft key.
soft key to store the number
soft key to transmit the position
soft key.
GROUP
ALL SHIPS
DIST ALERT MSG
POS REQUEST
RESEND
soft
BACK SELECT
DSC CALL
BACK SELECT
POS REQUEST
HISTORY
MEMORY
NEW ID
BACK SELECT
NEW ID
MMSI:
3--------
BACK FINISH SELECT
FINISH
soft key.
POS REQUEST
366901555
CATEG: SAFETY
Transmit a Call?
YES NO
POS REQUEST
366901555
CATEG: SAFETY
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
Page 65