Standard Horizon Eclipse GX1300 Owner's Manual page 80

Position Polling - Manual MMSI Entry
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " DSC ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " P O L L I N G
CALL ", and then press the
cancel, press the
4. Press the ▲ / ▼ keys to select " NEW ID ", then
SELECT
press the
5. P r e s s t h e ▲ / ▼ k e y s to scroll through
numbers, 0 to 9.
SELECT
6. Press the
and step to the next digit to the right.
7. Repeat steps 5 and 6 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the ◄ / ►
keys repeatedly until the wrong number is highlighted, then press the ▲
/ ▼ keys to correct the entry.
8. After the ninth number has been entered, press the
YES
9. Press the
signal.
10. After the polling call is transmitted, the
GX1300 waits for a reply from the radio which
was called, and the display will show " WAITING
FOR ACK ".
To transmit again, press the
11. When an acknowledgement signal is received,
the display will show " Received ACK ".
QUIT
12. Press the
Page 80
soft key.
SELECT
BACK
soft key.)
soft key.
soft key to store the number
soft key to transmit the polling
RESEND
soft key to return to the radio operation.
soft key. (To
soft key.
BACK SELECT
DSC CALL
AUTO POS POLLING
TEST CALL
POLLING CALL
DSC LOG
BACK SELECT
POLLING CALL
HISTORY
MEMORY
NEW ID
BACK SELECT
NEW ID
MMSI:
3--------
BACK FINISH SELECT
FINISH
soft key.
POLLING CALL
366901555
CATEG: ROUTINE
Transmit a Call?
YES NO
POLLING CALL
366901555
CATEG: ROUTINE
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
POLLING CALL
366901555
CATEG: ROUTINE
SINCE: 00:05
[ Received ACK
QUIT
GX1300
]