4.4
Displaying Target Data
You may display an AIS target's data by selecting it on the display.
4.4.1
Basic target data
To display basic target data first close any open menu, and then do the following:
1. Place the cursor on an AIS target symbol.
2. Press the [AIS DATA] key to show the target's basic data. The target is
marked as below.
Range from own ship to target
Bearing from own ship to target
3. Press any menu key to close the data display.
Note: You may also show basic data by pressing the [AIS MENU] key followed
by the [3] key (BASIC DATA).
Activated target selected for data display
Call sign
Course over ground
Speed over ground
CPA, TCPA
* = CSE (course) when water tracking mode is selected at radar.
# = STW (speed thru water) when water tracking mode is selected at radar.
Basic data display
4 AIS OPERATION
CALL
1436782 02
RNG
9.92NM
BRG
234.1°
TRU COG* 321.2°
TRU SOG# 21.1KT
CPA
2.8NM
TCPA 23.5MIN
Fusion target no.
47